|
Part #1102 PL-2 Panel Lighting LEDs
Red and Green LEDs (2 pair) panel indicators, with resistors.
INSTALLATION INSTRUCTIONS
This kit includes two (2) red LEDs, two (2) green LEDs and two
(2) 470 ohm resistors (yellow, violet, brown, gold). These LEDs run off the
power supplying your SwitchMaster switch machine (this power is constant). You
can use this kit as panel indicator showing the status of both legs of
a turnout.
Use the following schematic to wire the LEDs so they switch
from red (siding) to green (mainline):
Figure A LED Installation
For a very clean, professional installation use with SwitchMaster:
- Mounting Rings (#1105 / MR-6).
- Control with our SwitchMaster Toggle Switches (#1106 / TG-1)
- Push Button Switch (#1110 / PB-1)
| 
